Ap410C Access Point Overview; Update The Country Code; Ap410C Features - Extreme Networks ExtremeWireless AP410C Installation Manual

AP410C Access Point Overview

Update the Country Code

AP410C Features

Power Profile
Status LED Activity Description
Details about AP410C access point.
The AP410C is a high-performance 802.11ax 5G dual band access point designed for indoor high-density
environments. This device supports IEEE 802.11ax Orthogonal Frequency-Division Multiple Access
(OFDMA) multi-user access.
Update the Country Code
Learn how to update the country code on the access point.
If your access point is configured for the World Regulatory (WR) domain, set the country code to the
country in which the access point will be deployed to meet regulatory requirements and for optimal
wireless operation.
Note
The country code selection is for WR models only and is not available to FCC, CAN, and other
country-specific models. Per Federal Communications Commission (FCC) regulations, all Wi-
Fi products marketed in the United States must be set to U.S. channels only.
1. Power on the access point and wait for it to find and connect to ExtremeCloud IQ.
After the access point is connected, it is displayed in the table of devices on the Manage > Devices
page.
2. Select the check box next to the access point, and then choose Assign Country Code from the
Actions drop-down list.
In the dialog box, select the appropriate country from the drop-down list, and then select Save.
3. Upload your changes to the access point.
AP410C Features
The access point has the following features:
•
Two LED status lights
8 ExtremeWireless™ AP410C Access Point
on page 8
on page 8
on page 12
on page 12