22. In the following window, move the slider to the right or left
until the two gray horizontal stripes match.
Note:
The gray stripes will not perfectly blend together; however, try to
make the two tones match as closely as possible.
23. Click OK to register the calibration setting.
24. Follow the on-screen instructions to complete installation.
Note:
Do not change the printer name (Stylus Scan 2000), otherwise your
Stylus Scan will not work correctly.
Installing the software in your Macintosh
To print and scan with your Stylus Scan, you need to install the
following software included on the EPSON Stylus Scan 2000
Software for Macintosh CD-ROM shipped with your Stylus
Scan. This software must be installed before connecting the Stylus
Scan to your Macintosh.
r
17