Plugging In The Printer - Epson Stylus 300 User Manual

Place the printer where you can easily unplug the power
cord.
Avoid electrical outlets controlled by wall switches or
automatic timers. Also, avoid outlets on the same circuit as
large motors or other appliances that can cause fluctuations
in line voltage.
Keep the entire computer system away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
Use a grounded power outlet; do not use an adapter plug.
If you plan to use a printer stand, follow these guidelines:
kept level.
Q Place cables so they do not interfere with paper feeding;
secure them to a leg of the stand if possible.

Plugging in the Printer

1. Make sure that the power switch is turned off. It is off when
the 0 side of the switch is pressed down.
Setting Up Your Printer
1 - 7