Glossary; Bidirectional Printing; Control Code - Epson Stylus 300 User Manual

Glossary

The following definitions apply specifically to printers.
ASCII
American Standard Code for Information Interchange. A standardized coding
system for assigning numerical codes to letters and symbols.
auto line feed
When this feature is selected in the default-setting mode, each carriagereturn code
(CR) is automatically followed by a line-feed (TX) code.

bidirectional Printing

Printing in which the print head prints in both directions. This increases the speed
of printing.
bit
A binary digit (0 or l), which is the smallest unit of information used by a printer or
computer.
buffer
The portion of the printer's memory used to store data before printing it.
A unit of information consisting of eight bits.
A measure of the size of text characters, sometimes referred to as pitch.
A collection of letters, numbers, and symbols that provides you with the characters
used in a particular language.
condensed Printing
Printing in which the width of each character is approximately 60% of the width of
standard characters. Useful for fitting wide tables or spreadsheets onto the paper.

control code

Special codes used to control printer functions such as performing a carriage return
or line feed.
See characters per inch.
A value or setting that takes effect when the equipment is turned on, reset, or
initialized.
dot matrix
A method of printing in which each letter or symbol is formed by a pattern (matrix)
of individual dots.
Glossary GL-1