Epson Stylus 300 User Manual page 57

When the printed image is faint or nothing prints even after
you clean the print head, you need to replace the ink cartridge.
Use Epson ink cartridge SO20031.
1. Make sure the printer is on.
Open the printer cover.
2.
Press the PAUSE button to turn the PAUSE light on.
3.
Hold down the REPLACE INK (ALl) button for several
4.
seconds and release the button when the carriage moves to
the middle position. The PAUSE light begins blinking.
Lift the cartridge lever up until it clicks. The cartridge lifts
5.
out of the carriage.
Warning:
Never touch the circuit board on the carriage.
Lift the cartridge out of the printer and dispose of it properly.
6.
Do not take the used cartridge apart or try to refill it.
Warning:
soapy water. Avoid touching your eyes.
occurs, contact a physician.
Open the package containing the ink cartridge.
7.
Now follow the instructions in "Installing the Ink Cartridge" in
Chapter 1.
3-2 Maintenance and Troubleshooting
hands, wash them thoroughly with
your
If
irritation