Auto Line Feed - Epson Stylus 300 User Manual

Auto print direction
The printer ordinarily prints text bidirectionally for speed and
prints graphics characters unidirectionally for precise vertical
alignment.
When auto print direction is set to on, the printer switches
automatically between bidirectional (for text data) and
unidirectional motion (for graphics data). When this feature is
set to off, the print head motion is controlled by your software.
Network interface mode
If your printer is connected to a single computer, leave this
feature off. If you want to use the printer in a network and
share it among multiple computers, set this feature to on.
When this feature is set to on, data may be present in the
printer's buffer even though the printer is not continuously
printing. Always make sure the data light is off before turning
off the printer.
Mixed text/graphics mode
This feature is for software that has problems printing scalable.
font text combined with graphics. Leave the mixed
text/graphics mode set to off unless you notice problems in
your printout.

Auto line feed

When the auto line feed feature is on, each carriage return (CR)
code is accompanied by a line feed (LF) code. If your printed
text is unexpectedly double-spaced, set this feature to off. If text
lines print on top of each other, set it to on.
Using Other Printer Functions
2-13