Setup Guide
Attaching the Paper Support
Insert the paper support into the slots at the rear of the printer.
Plugging in the Printer
Follow the steps below to plug in the printer.
1. Make sure that the printer is turned off. It is off when the
P power light is off.
2. Check the label on the back of the printer to make sure that
the voltage required by the printer matches that of the
electrical outlet that you will be plugging it into. Also, make
sure that you have the correct power cable for your power
source.
c
Caution:
It is not possible to change the printer's voltage. If the rated
voltage and your outlet voltage do not match, contact your
dealer for assistance. Do not plug in the power cord.
7