Default Settings - Epson Stylus 1500 Reference Manual

All three initialization methods reset the font according to the default
settings selected using the control panel. However, ESC @ does not
initialize the printer mechanism, clear the input data buffer, or clear the
user-defined character set. The control panel initialization does not
initialize the printer mechanism or clear the user-defined character set.

Default Settings

The table below shows the default settings that take effect when the
printer is initialized.
Item
Top-of-form position
Page length
Left and right margins
Line spacing
Character pitch
Vertical tab position
Horizontal tab positions
Font selection
Special printing effects
User-defined character
set
In addition, hardware and control panel initialization erases any text in
the data buffer.
B-14
Technical Specifications
Default setting
Current paper position
Single sheets:
measured by self-test printing
Cancelled
1 6
-inch line spacing
Last font selected in Default Setting mode
Cleared
Every eight characters
Last font selected in Default Setting mode
Cancelled (except condensed and
economy printing)
Hardware/control panel initialization: cleared
Software initialization: deselected only