Setting The Thickness Adjustment Lever - Epson Stylus 1500 Reference Manual

To order EPSON papers and transparencies, contact your
dealer or call EPSON Accessories at (800) 873-7766 (U.S. only).
In Canada, call (800) BUY-EPSON for sales locations. Use the
following part numbers when ordering:
Paper or other media
Special coated paper
for 720 dpi
Special coated paper
for 360 dpi
High-quality glossy
paper
Transparency film
The built-in tractor feeder allows you to print on continuous
paper up to 17 inches (432 mm) wide or banner paper up to
16 inches (406 mm) wide. You can also use the tractor feeder to
print on continuous labels.

Setting the Thickness Adjustment Lever

Before you start printing, you should check the thickness
adjustment lever to make sure it is set correctly for the type of
paper or other media you are loading. Use the table below to
set the thickness adjustment lever for your media type.
Caution:
c
Before you change the lever setting, make sure there is no
paper in the paper path and that printing is paused. To do this,
press the Pause button or turn off the printer.
1-2
Paper Handling
Size
Letter (8.5 11 inches)
Legal (8.5 14 inches)
B (11 17 inches)
Super A3/B (13 19 inches)
Letter (8.5 11 inches)
Super A3/B (13 19 inches)
Letter (8.5 11 inches)
B (11 17 inches)
Super A3/B (13 19 inches)
Letter (8.5 11 inches)
Part number
S041062
S041067
S041069
S041070
S041060
S041066
S041072
S041074
S041075
S041064