Problems With Paper Feeding - Epson PictureMate Using Manual

The print head may need aligning; see page 51.
Your printout is blurry or smeared.
Use PictureMate Photo Paper to ensure proper
saturation, absorption of ink, and quality.
Make sure you load paper with the glossy side
face up.
Make sure your paper isn't damp or curled, or
loaded face down (the glossy side should be face
up). If it's damp or curled, load a new stack of
paper.
The print head may need aligning; see page 51.
Your printout is faint or has gaps in the image.
The print head nozzles may need cleaning; see
page 49 for instructions.
The photo cartridge may be old or low on ink. To
replace the photo cartridge, see page 34.
Make sure your paper isn't damaged, old, dirty, or
loaded face down. If it is, reload a new stack of
paper with the glossy side up.
56
Colors in your photo are wrong or missing.
Make sure the Color Effects setting is set to Color
for color photos. See page 20.
The print head may need cleaning; see page 49.
The photo cartridge may be old or low on ink. To
replace the cartridge, see page 34.
Try turning on or off Enhance under the Auto
Correct setting. Or, try manually adjusting the
brightness, saturation, or sharpness. See page 23.

Problems With Paper Feeding

Paper doesn't eject fully or is wrinkled.
If it's wrinkled when it ejects, the paper may be damp.
Paper doesn't feed correctly or jams in the printer.
If paper jams, remove the paper, then press OK to
clear the jam.
Make sure the paper support is pulled up, all the
way out, and is not leaning on the handle. The
handle should be all the way down in back of
PictureMate. Make sure the handle is not resting
on the paper. See page 5.