Problems With Paper Feeding - Epson PM 210 User Manual

Problems With Paper Feeding

Paper does not eject fully or is wrinkled.
If it is wrinkled when it ejects, the paper may be damp
or too thin.
Paper does not feed correctly or jams in the
printer.
❏
Make sure the top cover is open, and is not leaning
on the handle. The handle should be back of
PictureMate. Make sure the handle is not resting
on the paper. See "Loading Paper" on page 11.
❏
If paper does not feed, remove it from top cover,
reload it in the center, then slide both edge guides
against the paper (but not too tightly).
❏
If multiple pages feed at once, remove the paper
from the paper feeder, separate the sheets, and
carefully reload it.
❏
If paper jams, remove the paper, then press the
OK button to clear the jam.
50
Troubleshooting
❏
Load paper glossy side up. Load up to a maximum
of 20 sheets for photo papers, or 1 sheet for
PhotoSticker. Place the paper in the center and
slide both edge guides against it, but not so tight
that paper cannot move.
❏
Do not load plain paper; this may damage
PictureMate.
❏
Make sure you are using available paper for
PictureMate (see "Ink and Paper" on page 54).
Store paper flat to help prevent curling.