Using The Optional Battery - Epson PictureMate Using Manual

6
Pack PictureMate along with its power cable and
adapter in the box that PictureMate came in, or in
the optional carrying case.
Caution: Make sure the photo cartridge is installed. Do not
remove the photo cartridge before transporting. Don't place
PictureMate on its side or upside down, or ink may leak.
Note: If your prints don't look as good after PictureMate has
been moved, try aligning the print head (see page 51).
Tip: You can order an optional PictureMate Carrying Case from
the Epson Store. See the inside back cover of this book for
details.

Using the Optional Battery

To buy the optional battery, check with your
PictureMate retailer or go to www.MyPictureMate.com.
See page 58 for more information on obtaining the
battery.
40
Installing the Battery
1
Make sure PictureMate is turned off.
2
Unplug the AC adapter from PictureMate.
3
Open the battery cover on the back of the printer.
4
Slide in the battery as shown until it clicks into
place: