Problems With Paper Feeding; Miscellaneous Printout Problems - Epson PictureMate Pal PM 200 Basics Manual

Problems With Paper Feeding

Paper doesn't eject fully or is wrinkled.
The paper may be damp. Load new paper.
Paper doesn't feed correctly or jams.
● Make sure the handle is not resting on the paper.
●
If paper doesn't feed, remove it, separate the
sheets slightly, reload it between the edge guides,
and make sure the guides aren't too tight. See
page 5.
●
If multiple pages feed at once, remove the paper,
separate the sheets, and carefully reload it.
●
If paper jams, remove any sheets behind the
jammed paper and press OK to eject the jammed
paper. Don't pull out jammed paper from the top
of PictureMate Pal.
If paper loads incorrectly or jams frequently:
●
Use new paper loaded paper glossy or whiter
side up and separate the sheets slightly.
● Load a maximum of 20 sheets.
●
Make sure your paper is beneath the arrow on the
edge guides.
● Don't load plain paper; this may damage
PictureMate Pal.
●
Use only PictureMate 200 Series photo paper or
Epson Premium Photo Paper Glossy.
●
Store paper flat to help prevent curling.

Miscellaneous Printout Problems

PictureMate Pal prints blank pages.
The print head may need cleaning. See page 40.
The borders or layout are incorrect.
●
Check the Layout setting to see if it is correct. See
page 12 (if printing directly from PictureMate Pal)
or page 20 (if printing from a computer).
●
When you print borderless photos, PictureMate Pal
automatically expands your images. If too much of
your photos are cut off around the edges, you can
adjust the amount of expansion. See page 38 (if
printing directly from PictureMate Pal) or page 20
(if printing from a computer).
47