Abs Enabling/Disabling - Ducati MULTISTRADA 950 Owner's Manual

ABS enabling/disabling

This Function allows disabling or enabling the ABS
system without entering the Setting Menu.
Note
"Manual" disabling and enabling of the ABS is
only possible in ENDURO Riding Mode.
If the ABS is enabled, the instrument panel shows
"ABS-ON".
Once "ABS-ON" is displayed, press button (4) to
disable the ABS.
Note
Vehicle speed must be below or equal to 5 km/
h (3 mph) for activating the ABS disabling procedure;
if it is not so, you can only scroll the functions of the
Menu using buttons (1) and (2).
When pressing button (4) within the Menu, "WAIT ..."
is displayed for 2 seconds. During this time, Menu
scrolling via buttons (1) and (2) is disabled.
When system is disabled, "ABS-OFF" is displayed,
the ABS light (10, Fig 9) turns on to indicate that the
ABS is disabled and buttons (1) and (2) are enabled.
88
If the ABS is disabled, the instrument panel shows
"ABS-OFF" and ABS (warning light 10, Fig 9) on.
Once "ABS-OFF" is displayed, press button (4) to
enable the ABS.
Note
Vehicle speed must be below or equal to 5 km/
h (3 mph) for activating the ABS enabling procedure;
if it is not so, you can only scroll the functions of the
Menu using buttons (1) and (2).
1
4 2
Fig 41