Abs Enabling/Disabling - Ducati Multistrada 950S 2019 Owner's Manual

ABS enabling/disabling

This function allows disabling or enabling the ABS
system without entering the Setting Menu.
Note
"Manual" disabling and enabling of the ABS is
only possible in ENDURO Riding Mode.
If the ABS is enabled, the instrument panel shows
"ABS ON".
Once "ABS ON" is displayed, press button (4) to
disable the ABS.
Note
Vehicle speed must be below or equal to 5 km/
h (3 mph) for activating the ABS disabling procedure;
if it is not so, you can only scroll the functions of the
Menu using buttons (1) and (2).
After pressing button (4) within the Menu, "WAIT ..."
is displayed (instead of "ABS ON) for 2 seconds.
During this time, Menu scrolling via buttons (1) and
(2) is disabled.
When system is disabled, "ABS OFF" is displayed,
the ABS warning light (10, Fig 9) turns on to indicate
FRONT
2.5
TIRE
ABS
SETTING
that the ABS is disabled and buttons (1) and (2) are
enabled.
If the ABS is disabled, the instrument panel shows
"ABS OFF" and ABS light on (10, Fig 9). Once "ABS
OFF" is displayed, press button (4) to enable the
ABS.
REAR
2.5
TIRE
ON
MENU
2
1
4
Fig 50
113