Ducati MULTISTRADA 950 Owner's Manual page 98

When entering the function, the DTC value starts
flashing.
Use buttons (1) and (2) to set required value, which
can be 1 to 8 or "OFF", i.e. DTC disabled. To confirm,
press the button (4).
The instrument panel then shows the new set level
and automatically goes back to the previous screen.
During this phase, to quit without editing the
currently-set level, keep button (2) pressed for 2
seconds.
Note
By setting "– " (Off), the DTC will be disabled.
1
4 2
Fig 49
97