Table of Contents
Advertisement
Setting the units of measurement: Resetting
to automatic DEFAULT settings
This function allows you to restore the automatic
settings for the units of measurement of all
indications displayed on the instrument panel.
You open the "UNITS SETTING" menu, as described
on the previous pages. Select DEFAULT option
(flashing frame), by pressing button (1) or (2).
Once function is highlighted, press button (4) for 2
seconds.
The display shows "WAIT.." for 2 seconds; then the
"DF - OK" message displayed for another 2 seconds
indicates that the units of measurement have been
restored.
At the end of the 2 seconds, the instrument panel
quits the function and automatically goes back to
the previous screen.
1
4
2
Fig 81
1
4
2
Fig 82
127
Hide quick links:
Advertisement
Table of Contents
