Loading Envelopes - Epson LQ-1050 User Manual

3. The self test continues until the paper runs out or until you press
the
ON LINE
Note: To resume the test, press the
4. To end the self test when paper is loaded, press the
button to eject the paper. Then turn off the printer.

Loading Envelopes

You can print on plain, bond, or air mail envelopes. The cut sheet
feeder can hold up to 25 plain or bond envelopes, or 30 air mail
envelopes. Before printing on envelopes, you need to set the paper
thickness lever. See Printing on Special Paper in Chapter 2.
WARNING
settings of your application program keep the printing
entirely within the printable area.
You load envelopes in much the same way as regular paper.
1. Make sure that the paper release lever is in the single-sheet
position.
CAUTION:
feeder, be sure to load envelopes into bin 1, never into
bin
2.
LOAD/EJECT
command.
5-14 Using the Printer Options
button. To stop the test, press the
When you print on envelopes, be sure that the
If you are using the double-bin cut sheet
Make sure
that
button or with the ESC EM software
ON LINE
you select bin 1 using the
button.
ON LINE
button once more.
LOAD/EJECT