Overall Printing Style - Epson LQ-1050 User Manual

ESC D
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
This command allows setting of up to 32 horizontal tabs, which
are entered as nl, n2, n3, etc., (from 1 to 255) with the number 0
character terminating the command. The tab settings must be
entered in ascending order. ESC D 0 clears all tabs. The default
settings, when power is turned on or after an ESC @ command,
are at every eight characters. The tab settings are not affected by
changes in cpi. The tab positions in proportional printing are
determined by the 10 cpi character size.

Overall Printing Style

ESC x
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
0: Selects draft mode.
1: Selects Letter Quality (LQ) mode.
Overrides the SelecType panel setting.
9-22 Command Summary
ESC
Set Horizontal Tabs
Select Letter Quality or Draft