Character Spacing - Epson LQ-1050 User Manual

The mode uses fewer dots per character for high-speed
DRAFT
printing, which makes it ideal for rough drafts and editing work.
and
ROMAN SANS SERIF
fonts take a little longer to print, but produce nicely formed
characters suitable for most documentation requirements.
Other fonts are available on optional font cartridges. See The Multi-
Font Module in Chapter 5.

Character Spacing

To select character spacing, press the
indicator light of the desired character spacing comes on.
Note: Some of the fonts in the optional font module do not offer
all character spacings. See The Multi-Font Module in Chapter 5.
For each of the two Letter Quality fonts, you can choose a fixed
character pitch of 10, 12!, or 15 characters per inch (cpi) or
proportional spacing. However, high-speed draft and normal draft
fonts cannot be combined with proportional spacing. Draft
overrides proportional.
For the fixed pitch settings (10, 12, and 15 cpi), each character is
given an equal amount of space. For proportional spacing, character
width varies from one character to the next. For example, a narrow
letter like i receives less space than a wide letter like W.
3-24 Using the Printer
are Letter Quality (LQ) fonts. Letter Quality
PITCH
PITCH
button until the