General Operation - Dual XDCPA10BT Installation & Owner's Manual

XDCPA10BT INSTALLATION

General Operation

Power On/Off
Momentarily press to turn the unit on. Press and hold to turn the
unit off.
Volume
Press or to increase or decrease the volume level.
Mute
Momentarily press MUTE to silence the audio. Momentarily press MUTE
again to return to the previously selected volume. Rotating the volume
knob while the volume is muted will also cancel the mute function.
Mode
Press MODE at the top left corner of the screen to display the main
menu.
Radio/USB/CarPlay/Android Auto/BT Phone/BT Audio/AV In/Setting
Note: Modes of operation can also be accessed by selecting the
corresponding icon from the main menu.
Operation Mode Selection: Press the icon at the top left corner of the
Main Menu
screen to display the OSD main menu. Press the Radio/USB/CarPlay/
Android Auto/BT Phone/BT Audio/AV In/Setting in the Main meu pate to
select the desired source.
Dimmer
Press the icon to adjust the brightness.
A/V In
Connect external audio/video devices to the rear RCA Type A/V Input
USB
Insert a USB flash drive to play MP3/FLAC files.
Reset
To resolve abnormal operation or if the unit is inoperable, Press the
RESET button located behind the front panel directly under USB port.
The unit will reset the main processor to the default setting,
Note: Use the tip of a pen to access the reset button. To restore the
factory default software settings.
9