General Operation - Dual XRM47RGB Installation & Owner's Manual

Am/fm receiver with bluetooth and rgb color control
Table of Contents

Advertisement

XRM47RGB
OPERATION

General Operation

Power On/Off
Press the
button to turn the unit on. Press
again to
turn the unit off.
Changing Sources
Press SOURCE to select between Radio, USB, Auxiliary
Input and Bluetooth. Modes of operation are shown in the
display.
Volume
Adjust volume using the volume knob (00-40).
Mute
Press to silence the audio. Press again to resume
listening at the previously selected volume.
Auxiliary Input
Insert a 3.5mm cable in the unit's front AUX port.
Reset
Press the RESET button to reset the unit back to the
factory settings if abnormal operation occurs. The reset
button is located on the front panel.
Setting the Clock
With the unit on, press DISP to display clock time. Press
and hold DISP until the hours begins to flash, then
release. Rotate the volume knob to adjust the
time. Press and hold DISP to finish the clock setting.
Display
Press DISP to toggle display between various displayed
information.
Audio / Menu
Press the volume knob momentarily to select between
audio functions.
Press and hold the volume knob for more than two
seconds to select between the menu functions.
Rotate the volume knob left/right to adjust or activate
the desired function/audio.
5

Advertisement

Table of Contents
loading

Table of Contents