For Windows NT 4.0 Users
Using your printer on a network
To use your printer over a network with Windows NT 4.0, you
must set up the computer to which the printer is connected (the
print server) and also set up the other computers on the network
which will use the printer (the client computers). To set up the
print server so that the printer is shared across the network, see
your Windows NT 4.0 documentation.
The instructions below explain how to set up your Windows NT
4.0 as a client computer to use your printer, after you have set up
the print server.
1. Make sure your printer software is installed (see page 55) if it
is not installed).
2. Click Start, point to Settings, and click Printers.
3. Double-click the Add Printer icon.
4. Click the Network printer server radio button. Click Next.
5. Select the print queue where print jobs destined for this
printer will be sent, or select the network path to the printer.
Note:
Be sure to confirm all network settings with the network
administrator.
64
Installing the Printer Software