Setting The Installed Option - Epson ColorPage EPL-C8000 Setup Manual

then press the Enter key. If you selected a port other than lpt2:
in step 4, substitute this port for "lpt2" in the command above.
You should also substitute the name of your print server for
"epserver", and the name of the printer, as defined on the
print server, for "printer".
6. Restart your computer.
Note:
If you need to cancel this setting, type / d instead of the network path
to your printer in step 5, for example, C:\net use lpt2: /d .

Setting the installed option

If you have installed any options in the printer, you need to make
optional settings in your printer driver before using your option.
Note:
When the EPSON Status Monitor 2 is run and the printer is turned on,
the information on the installed option is automatically transmitted to
the computer and its information appears in your driver's screen.
1. Click Start, and select Settings and Printers.
2. Right-click the icon of your printer, and click Properties.
66
Installing the Printer Software