Table of Contents
Advertisement
Normally you should not have to adjust the Edge Smoothing
setting. However, because Edge Smoothing modifies the size
of dots along the edges of text, lines, and graphics, the edges
might appear too dark or too light relative to the area inside the
edges.
To adjust for this, use the Light setting if the edges appear
dark, and use the Dark setting if the edges appear too light.
To change the Edge Smoothing setting:
1. From your software program, choose Print or Print Setup in
the File menu.
2. Then choose the Setup option (Depending on your
software program, you might need to select Options or
Printer.)
3. If necessary, select the ActionLaser 1100 in the list of
printers. (Not all software programs prompt you to select
the printer.)
4. In the Setup dialog box for the ActionLaser 1100, choose the
Options button.
5. Change the Edge Smoothing setting as appropriate.
6. Choose OK. Then close all screens by choosing OK or Close
as appropriate.
If your printed images still need to be improved, you probably
need to change the print density setting. For a darker edge
smoothing setting, make the print density lighter and vice
versa. See the next section, "Adjusting print density."
Note:
Edge smoothing may not improve graphics that include gray shading
or a screen pattern.
patterns, you might want to change the Edge Smoothing setting to off.
If
you are printing gray shading or screen
Troubleshooting 3-9
Advertisement
Table of Contents
