Table of Contents
Advertisement
Missing areas on printed image
Your paper may be moist or damp. Printing is sensitive to
moisture absorbed by the paper. The higher the moisture
content in the paper, the lighter the printed output. Do not
store your paper in a humid or damp environment.
You may not be using the correct type of paper for your
printer. If the surface of your paper is too rough, printed
characters appear distorted or broken. Smooth, high-quality
copier paper is recommended for best results. See Chapter 1
for information on choosing paper.
Completely blank pages
Check to be sure the toner cartridge is installed as described in
the Read This First guide.
The toner cartridge may be empty. Replace the cartridge.
The problem may be with your software program or interface
cable. Print out a test sheet by briefly pressing the reset button
on the back of the printer (make sure the Error light is not on).
If the test page is blank, the problem is with the printer. Call
your dealer or a qualified service person.
Printed image is light or faint
The toner cartridge is probably empty. Replace the toner
cartridge as described in the Read This First guide.
Your paper may be moist or damp. Printing is sensitive to
moisture absorbed by the paper. The higher the moisture
content in the paper, the lighter the printed output. Do not
store your paper in a humid or damp environment.
Troubleshooting 3-7
Advertisement
Table of Contents
