Table of Contents
Advertisement
Other status conditions are indicated by the combination of the
Ready and Error lights. The following table describes all status
conditions that can be indicated by the printer's Ready and
Error lights:
Ready
o f f
Slow
flashing
F l a s h i n g O f f
On
off
off
F l a s h i n g O n
Flashing
On
The EPSON Control Panel provides more precise information
about the printer status or any errors that occur. See the next
section.
1-6
Using Your Printer
Printer status
Error
Printer is off.
Off
Printer is in power save mode.
Off
Print data is being received at the printer or has
already been received.
Printer is ready to receive print data.
off
Either the paper tray is empty or there is a
On
paper feed problem.
Flashing
One of the following errors has occurred:
• Paper has jammed inside the printer.
• The front cover is open.
• The toner cartridge is not installed.
One of the following errors has occurred:
• Insufficient memory to print job.
• Printer is In manual feed mode and is waiting
for the next sheet.
• There is a printer overrun error.
The printer is warming up.
Flashing
On
A printer engine or controller error has
occurred. Contact your dealer or a qualified
service person.
Advertisement
Table of Contents
