Table of Contents
Advertisement
Edge Smoothing
Allows you to adjust the edge smoothing feature or turn it
off. Edge smoothing improves the appearance of text and
graphics by smoothing the jagged edges of characters and
line art, resulting in higher quality output. For more
information about edge smoothing, see chapter 3.
The settings for Edge Smoothing are Light, Medium
(default), and Dark Normally you should not have to
adjust Edge Smoothing.
However, because edge smoothing modifies the size of
dots along the edges of text, lines, and graphics, the edges
might appear too dark or too light To adjust for this, use
the Light setting if the edges appear dark, and use the Dark
setting if the edges appear too light.
Toner Density
Specifies the density of the toner applied to the page.
Normally, you should not need to adjust this setting. It is
provided to allow you to compensate for variations among
toner cartridges.
The settings for Toner Density are Extra Light, Light,
Medium (default), Dark, and Extra Dark
Note:
Increasing the density increases the rate of toner consumption.
Changing the Printer Settings
2-11
Advertisement
Table of Contents
