Faxing Problems; Print Quality Problems - Epson WorkForce 520 Quick Manual

2. The message on the LCD screen asks if the paper
has been removed. Press
3. Lift the scanner cover, remove any jammed paper
inside, and lower the scanner cover.
4. Close the ADF cover and reload the paper.

Faxing Problems

■
Make sure the recipient's fax machine is turned on and working.
■
Make sure the
Verify that the telephone wall jack works by connecting a phone to it.
■
Make sure the
■
If your phone line includes voice mail answering services, calls or faxes may be
inadvertently received by your voice mail service.
■
If the line has static, press K
Communication
■
If the product is connected to a DSL phone line, you must have a DSL filter
connected to the phone jack. Contact your DSL provider for the filter.
■
If you connected a telephone or answering machine, make sure it is connected
to the port.
EXT.

Print Quality Problems

■
For the best print quality, use Epson papers (see page 26) and genuine Epson
ink cartridges (see page 47).
■
If you notice light or dark bands across your printouts or they are too faint,
run a nozzle check (see page 44) to see if the print head needs cleaning.
■
If you notice jagged vertical lines, you may need to align the print head. See
the online User's Guide for instructions.
■
The ink cartridges may be low on ink. Check your cartridge levels (see
page 45) and replace cartridges, if necessary (see page 47).
■
Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not
recommended), or use a small amount of glass cleaner on a soft cloth, if
necessary. Do not spray glass cleaner directly on the glass.
to clear the message.
1
port on the product is connected to a telephone wall jack.
LINE
light is turned on to receive faxes automatically.
Auto Answer
Fax
, and turn off the
, press x , select
Menu
and
V.34 ECM
Fax Settings
settings.
Problems and Solutions
, select
53