Table of Contents
Advertisement
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Before installing the server cover:
1. Watch the procedure. A video of this procedure is available from the following links:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Dy5N2dPXFx5Pht-FljAi6S
• Youku:
https://list.youku.com/albumlist/show/id_51977169
2. Ensure that all adapters and other components are installed and seated correctly and that you have not
left loose tools or parts inside the server.
3. Ensure that all internal cables are correctly routed. See "Internal cable routing" on page 30.
4. If you are installing a new server cover, attach the service label to the inside of the new server cover first
if necessary.
Note: A new server cover comes without a service label attached. If you need a service label, order it
together with the new server cover. The service label is free of charge.
To install the server cover, complete the following steps:
.
Chapter 3
Server hardware setup
83
Advertisement
Table of Contents
