Using The Keypad To Enter Numbers And Characters; Select Scan And Print Settings - Epson WorkForce 500 Quick Manual

Using the Keypad to Enter Numbers and Characters

Follow these guidelines to enter numbers and characters.
■
To move the cursor, add a space, or delete a character:
Button
l or r
Auto Answer/Space
Speed Dial/Backspace
■
To enter a fax number, use the numeric keypad. Press
a pause symbol (
# button to type the + symbol when entering a phone number in international
dialing format.
■
To enter characters, press
lowercase, or numbers. Then use the numeric keypad to enter the characters
indicated on the button. Press the button repeatedly, if necessary, until the
character you want displays on the screen.
Press 1
symb

Select Scan and Print Settings

Use these settings to adjust the image quality of incoming and outgoing faxes,
select the paper size loaded in your WorkForce 500 Series, select the size at which
faxes are printed, and select when you want printed reports.
1. Press
Setup
2. Select
Fax Settings
You see this screen:
3. Select
Scan & Print Setup
16
Faxing a Document or Photo
) when a brief pause is required during dialing. Use the
–
Display/Crop
to enter these characters: ! # % & ' ( ) * + ,
.
, then press
, then press
Function
Moves the cursor to the left or right.
Inserts a space and moves the cursor one
character to the right.
Deletes a character and moves the cursor one
space to the left.
to switch between uppercase,
.
OK
.
OK
to insert
Redial/Pause
. / : ; = ? @ ~
–