Epson WorkForce 500 Quick Manual page 17

4. Adjust any of the following settings:
Setting and options
Resolution
Standard
Fine
Photo
Contrast
–4 to +4
Paper Size
Letter (default)
Legal
A4
Auto Reduction
Off
On
Last Trans.
Off
On Error (default)
On Send
Setting Up a Speed Dial List
You can create a speed dial list of up to 60 fax numbers so you can quickly select
them for faxing. You can also print the list for easy reference (see page 18).
Creating a Speed Dial List
1. Press .
Setup
2. Select
Fax Settings
Description
Sets the scan resolution of outgoing faxes and
the print quality of received faxes.
Sets the contrast when sending and receiving
faxes.
Indicates the size of paper loaded in the
WorkForce 500 Series.
Indicates whether large incoming faxes are
reduced to fit on the selected Paper Size (On), or
printed at their original size on multiple sheets
(Off).
Indicates when the WorkForce 500 Series prints
a report on the last transmitted fax. Select Off to
turn off report printing, On Error to print reports
only when an error occurs, or On Send to print
reports for every fax you send.
, then press . You see this screen:
OK
Setting Up Fax Features
17