Command Link Multifunction Speedometer - Yamaha F50 Owner's Manual

Instruments and indicators
& fuel meter unit type.
After the main switch is first turned to the
" " (on) position, all of the displays come on
as a test. After a few seconds, the unit will
change to normal operation.
For more information, see the operation
manual for the meters.
1
1. Set button
2. Mode button
1
3
1. Speedometer
2. Fuel meter
3. Multifunction display
48
1. Set button
2. Mode button
2
ZMU05432
1. Speedometer
2. Fuel meter
3. Multifunction display
2
EMU41042
Command Link Multifunction
ZMU05433
The speedometer unit shows the boat speed
and has functions of fuel meter and system
voltage display. The chosen display is se-
lected using the "
(mode) buttons as described in this section.
In addition, the speedometer can show the
desired unit of measurement such as km/h,
mph, or knots. If the speed sensor is in-
stalled, the unit can also show the trip dis-
play. However, even if the speed sensor is
not installed, the trip display can be shown
1
1
3
Speedometer
" (set) and "
2
ZMU05434
2
ZMU05435
"