Note On Connecting Analog I/O Modules - Siemens S7-1500 Manual

5.4

Note on connecting analog I/O modules

Up to four analog terminal modules can be connected to the 40 clamping points of an analog
I/O module. Two terminal modules can be connected to each side of the I/O module.
The alphabetically labeled clamping points of the analog terminal module are connected to
the numbered clamping points of the I/O module as shown in the table below.
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,
Wiring SIMATIC TOP connect to the I/O modules
5.4 Note on connecting analog I/O modules
43