Wiring Unused Channels Of The Analog Input Modules; Using The Shield Connection - Siemens 2AI 2/4WIRE HF Manual

5.2

Wiring unused channels of the analog input modules

Rules
Pay attention to the following instructions when wiring unused channels:
● "Deactivate" unused input channels when assigning parameters.
● A deactivated channel always returns the value 7FFF
5.3

Using the shield connection

Rules
To prevent interference we recommend the following for analog electronic modules:
● Use shielded wires to the sensors and actuators.
● Lay out the wire shields on the shield connection.
● Connect the shield connection to the ground bus with low impedance.
2 AI I 2/4WIRE HF analog electronic module (6ES7134-4MB02-0AB0)
Manual, 04/2007, A5E01076111-01
5.2 Wiring unused channels of the analog input modules
.
H
Connecting
25