Siemens S7-1500 Manual page 65

Terminal module TPOo optocoupler for outputs
6ES7924-0BF20-0Bx0
Voltage V
No error at the switching output
Wire break at the switching output
Short-circuit at the switching output
Current I
General data
Connection to SIMATIC fitted for
Degree of protection
Operating temperature
Mounting position
Connecting terminals
Stripped length
Conductor cross-section
Finely stranded without end sleeve
With end sleeve for screw-type terminals
With end sleeve, push-in system
Screwdriver
Tightening torque of screw-type terminals
Weight
Screw model
Push-in model
Clearances and creepage distances
Dimensions (W x H x D) in mm
6ES7924-0BF20-0Bx0
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,
, V
SF1 SF2
, I
SF1 SF2
6.7 Technical specifications for terminal modules
Typ. Vop – 2 V
Approx. 0 V
0 V to V , clocked
op
min. 4 mA/max. 200 mA
16-pin IDC connector with fitted strain relief
IP20
0 ... 60 °C
Any, except overhead
Screw-type terminal or push-in system
9 mm
0.5 ... 2.5 mm
2
0.5 ... 2.5 mm in accordance with DIN 46222-1
2
0.2 ... 2.5 mm
2
According to DIN 5264 B 0.6 x 3.5 mm
0.4 ... 0.7 Nm
0.29 kg
0.25 kg
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
pollution degree 2
Approx. 130 x 76 x 60
Technical specifications
65