Siemens S7-1500 Manual page 58

Technical specifications
6.7 Technical specifications for terminal modules
Table 6- 8
Terminal modules TP1 and TP3, 16-pin
1-wire connection with LED 6ES7924-0AA20-0Bx0
3-wire initiators with LED 6ES7924-0CA20-0Bx0
Type of supply voltage
Operating voltage
Max. permissible continuous current per signal
Max. permissible total current (power supply)
Connection to SIMATIC fitted for
Operating temperature
Mounting position
Clearances and creepage distances
Dimensions (W x H x D) in mm
1-wire connection 6ES7924-0AA20-0Bx0
For 3-wire initiators 6ES7924-0CA20-0Bx0
Table 6- 9
Terminal modules TPA, 16-pin, for analog modules in S7-1500 or ET200MP
6ES7924-0CC20-0Ax0 series
Type of supply voltage
Operating voltage
Max. permissible continuous current per signal
line
Connection to SIMATIC fitted for
Operating temperature
Mounting position
Clearances and creepage distances
Dimensions (W x H x D) in mm
6ES7924-0CC20-0Ax0
58
Technical specifications for terminal modules TP1 and TP3 with LED
Technical specifications for terminal module TPA
DC
max. 24 V
1 A
4 A / byte
16-pin IDC connector with fitted strain relief
0 to + 60° C
Any
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
pollution degree 2
Approx. 40 x 58 x 50
Approx. 57 x 76 x 60
DC
max. 50 V
1 A
16-pin IDC connector with fitted strain relief
0 to + 60° C
Any
IEC 60664-1, IEC61131-2,
CSA C22.2 No 142 UL 508, VDE 0160,
overvoltage category II,
pollution degree 2
Approx. 57 x 76 x 60
SIMATIC TOP connect for S7-1500 and ET200MP
Manual,