Setting Up Network Printing; Windows Xp And 2000; Windows Me And 98 - Epson Stylus CX5400 User Manual

Setting Up Network Printing

Windows XP and 2000

Windows Me and 98

Macintosh
Windows XP and 2000
This section tells you how to set up the EPSON Stylus CX5400 so that other
computers on the network can print to it. (The scanning feature cannot be shared
with other computers on the network.)
Note: This section is for small network users only. If you are on a large network
and would like to share the EPSON Stylus CX5400, consult your network
administrator.
To install software programs in Windows 2000, it is necessary to log on as a user
with administrative privileges (a user who belongs to the Administrators group).
To install software programs in Windows XP, it is necessary to log on with a
Computer Administrator account. You cannot install software programs if you log
on as a Limited account user. After you install Windows XP, the user account is
set as a Computer Administrator account.
The images that are provided in the following section pertain to Windows 2000.
First, you need to set up the EPSON Stylus CX5400 as a shared printer on the
computer that it is directly connected to. Then, you must install the EPSON Stylus
CX5400 on each computer that will access it through the network.
Setting Up a Shared Printer
Follow the steps below to configure your computer to share the Stylus CX with other
computers on a network.
1. Click
Start > Control Panel
or
Printers Printers and Faxes
2. Right-click the icon for the EPSON Stylus CX5400, then click
or
Start > Settings > Control Panel
.
, then click
.
Sharing
77