Setup And Software Installation Problems - Epson Stylus CX5400 User Manual

3. Press the
Color Copy
If the check page prints, the problem probably lies in your software settings, the
interface cable, or your computer.
If the check page doesn't print, you may have a problem with your printer. Try the
suggestions in the following sections.

Setup and Software Installation Problems

Tip: It's a good idea to check EPSON's web site periodically for possible updates
to your software. Visit http://support.epson.com and check the section for your
product to see if there is new software available for downloading to your
computer.
The EPSON Stylus CX5400 makes noise after ink cartridge installation.
When you install ink cartridges, the Stylus CX must charge its ink delivery
system. Wait until it's finished (the
or it may use excess ink the next time you turn it on.
Make sure the ink cartridges are seated securely and no packing material remains
in the Stylus CX. Turn off the Stylus CX, wait a moment, then turn it back on.
You cancelled software installation or connected the EPSON Stylus CX5400
before installing the software.
Your EPSON software may be incorrectly installed. See Uninstalling Your Software.
Make sure you carefully follow the steps on your Start Here sheet when you reinstall
your software. You need to connect the EPSON Stylus CX5400 at the correct time in
the installation process.
You're having problems installing the software.
Make sure your system meets the requirements listed in System Requirements.
Close other programs, including screen savers and virus protectors, and install
again.
Make sure that your computer's Universal Serial Bus (USB) Controller is working
properly in Device Manager; see your Windows help system for details.
button.
light stops flashing) before you turn it off
On
63