Cleaning The Stylus Cx - Epson Stylus CX5400 User Manual

Cleaning the Stylus CX

To keep your EPSON Stylus CX5400 operating at its best, you should clean it
periodically.
1. Turn off the EPSON Stylus CX5400, unplug the power cord, and disconnect the
USB cable.
2. Remove all the paper from the sheet feeder.
3. Clean the exterior with a soft, damp cloth. (Keep the scanner and scanner lid
closed as you clean.)
4. If necessary, lift up the scanner and clean ink out of the interior with a soft, damp
cloth.
Don't touch
the metal
carriage shaft
5. Carefully lower the scanner and press it down until it clicks into place.
6. If the document table glass gets dirty, clean it with a soft, dry, lint-free cloth.
Paper towels are not recommended for cleaning the glass. (Be sure there's no dust
on your document table; it can cause white spots to appear in your scanned
image.)
If the glass is stained with grease or other hard-to-remove material, use a small
amount of glass cleaner on a soft cloth to remove it. Wipe off any remaining
liquid with a dry cloth. Don't spray glass cleaner onto the document table glass.
Warning: Don't touch the gears inside the EPSON Stylus CX5400.
58