Table of Contents
Advertisement
6. The right middle log has a groove on the
bottom to sit on the chassis and has to sit
on the tab on the back of the right front. The
right middle log should have a recess area
that fits around the ramp log as shown in
Figure 29.
Right Middle
Log
f i r e - p a r t s . c o m
Figure 29 - Installing Right Middle Log
7. The rear middle log should fit between the
ramp log and the rear burner. The left and
right middle logs have recessed areas for
the rear middle log to sit into (See Figure
30). Be careful not to push the rear burner
out of position while installing this log.
Rear
Middle Log
Figure 30 - Installing Rear Middle Log
8. Rest rear log in back corner sections of
chassis assembly as shown in Figure 31.
9. Place the left top log onto the rear log and
the left middle log. Make sure to place the
projection on the bottom of the left top log
into the recessed areas on the rear and left
middle logs (see Figure 32).
18
INSTALLATION
Continued
www.lennoxhearthproducts.com
Rear Log
Figure 31 - Installing Rear Log
Left
Middle
Log
Figure 32 - Installing Left Top Log
10. Rest the middle crossover log onto the right
middle log and the left front log (see Figure
33). Make sure to match the projection on
the bottom of the crossover log with the
recess area in the right middle log and the
left front log.
11. Place the top rear log onto the rear log as
Middle
Crossover
Log
Figure 33 - Installing Middle Crossover Log
Left Top Log
Rear Log
126543-01A
Advertisement
Table of Contents
