Getting Started - Envision EN5400 User Manual

GETTING STARTED

WARNING: Do not operate the LCD monitor with unspecified power supply.
Usage of incorrect voltage will cause malfunction and may cause fire or electric
shock.
Introduction
Bright and sharp images of text and graphics are what you will find with your LCD color
monitor. The LCD monitor provides a maximum resolution of 1024 x 768 pixels with a
flicker-free display at up to 75Hz refresh rates that offers bright, sharp and vibrant color
display without the radiation emission and hazards of CRT monitors.
Features
˙15" (38.1cm) TFT Color LCD Monitor
˙Supports XGA resolution of 1024 x 768 pixels
˙EPA E
NERGY
˙Digital Character Smoothing
˙Automatic Set-Up
˙Windows 95/98/2000/XP Plug & Play Compliant
˙Versatile, functional & User friendly OSD
˙Plug & Play: Conform to the VESA standards and support DDC1/2B spec.
Unpacking and Checking the Package Contents
Before unpacking your LCD Monitor, prepare a suitable workspace for your LCD Monitor
and computer. You need a stable, level, and clean surface near a wall outlet.
1.
Set the LCD Monitor box in an upright position and open from the top of the box
before removing the right/left cushions.
2.
Remove the back cover from your monitor (pull from the bottom of cover to open)
to install your PC system.
Accessories
1 pc
Signal Cable AC/DC Adaptor
(
Already Built-in)
Installing the Monitor
DO NOT install the monitor where sudden temperature changes may occur, or in
humid, dusty, or smoky areas as it may cause fire, electric shock or damage.
DO NOT place your LCD Monitor near a window as it may be severely damaged if
exposed to rain, water, moisture, or sunlight.
MAINTAIN good ventilation; covering of ventilation slots or holes may cause fire.
PLACE the monitor at least 4" (or 10 cm) way from the walls.
SAFE storage temperature of the LCD Monitor is in a range of -20 to +65℃.
®
S
TAR
1 pc
Power Cord
1 pc 1 pc
QSG
(Quick Start Guide)
6
1 pc
CD User's Manual