Page 1
EN-770e EN-770e 17 inch Flat CRT Color Monitor User’s Manual by Envision Peripherals, Inc. www.ENVISIONmonitor.com.com Before operating your monitor, please read this manual thoroughly. EN-770e 053102 31MY02...
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. EN-770e For Your Safety Notice 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 3
EN-770e For Your Safety • The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin.
@60Hz • EPA ENERGY STAR Package Contents The box that your monitor was shipped in should have included the following items: 1. EN-770e Color Monitor 2. Power Cord 3. Quick Start Guide 4. Booklet (containing Warranty and Safety information) EN-770e ®...
Before You Operate the Monitor EN-770e Installing & Removing the Base EN-770e 31MY02...
Page 6
3. Plug the other end of the power cord into a grounded AC outlet or UL-approved power strip. EN-770e Caution: Make sure the power cord is the correct type that is required in your area. This monitor...
CEE-22 terminated connectors (see illustration above). EN-770e Follow these steps: 1. Connect the built-in video cable into the 15-pin connector on the back of your computer and tighten the two screws.
Contrast: Press this button to adjust the picture’s contrast. If the OSD window is open, this button allows you to move within the window and select desired functions. EN-770e Operating Instructions MENU: Press this button to open the OSD window or select a highlighted function.
3. Press MENU to open the function’s window. 4. Press the < or > buttons to change the settings of the function. EN-770e Operating Instructions 5. To save and exit, press the EXIT icon or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2-4.
EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B. EN-770e Operating Instructions Windows INF Driver File Most computers will automatically configure your monitor to work with your computer.
Picture has color defects • Adjust the User Color setting in the OSD window. (white does not look white) EN-770e Technical Support (FAQ) Possible Solution and to the monitor. (ENVISION monitor drivers are available at: www.ENVISIONmonitor.com) electrical interference.
Specifications Size Viewable image size Preset Display area Dot Clock Maximum Resolution Plug & Play EN-770e Appendix Input 17.0" (43.2 cm) 11.4” (29 mm) neck 0.21mm(H), 0.25mm(D) dot pitch 90 degree deflec- tion Input Video Sig- 16.0” (40.6 cm) diagonal Power Source 11.8”...
Page 13
Specifications (continued) Environmental Operating Temp: Considerations 32° to 104°F (0° to 40°C) ambient Operating Humidity: 10% to 90% Signal Cable Attached Mini D-sub 15 Male Optimal Viewing Mode: 1024 x 768 x 85 Hz EN-770e Appendix EN-770e 31MY02...