Dual Home Fep Addresses Configuration; Table 30. Other Frames W/O Snap: Source Routing; Table 31. Other Frames W/O Snap: Explorer Frames Type - Enterasys SSIM-H2-02 Installation And User Manual

Source Routing
Enables or disables Source Routing in Other Frames w/o SNAP frames transmitted
to Token Ring.
Value
SR
noSR

Table 30. Other Frames w/o SNAP: Source Routing

Default: SR
Explorer Frames Type
Sets the type of explorer that should be used for Other Frames w/o SNAP traffic.
Value
ARE
STE

Table 31. Other Frames w/o SNAP: Explorer Frames Type

Default: STE

Dual Home FEP Addresses Configuration

To configure Dual Home FEP Addresses on a TS port, select Dual Home FEP
Addresses Configuration on the Virtual Port Configuration menu of the TS
port. For each Virtual Port (on each TS port), 10 addresses can be configured as
Dual Home FEP addresses. A constant list of 10 MAC addresses numbered 1-10 is
shown when this menu is opened. Addresses which consist entirely of zeros
represent empty entries.
To add or change an address, highlight the address, press ENTER, and then either
enter the new MAC address or simply press ENTER once more to enter a NULL
address (empty entry).
SSIM-H2-02 Fast Ethernet - Translational Switch SmartStack Interface Module Installation and User Guide
Source Routing information will be added to frames
converted from Ethernet to Token Ring format.
Frame will be transmitted to Token Ring as a transparent
frame.
Use All Routes Explorer.
Use Spanning Tree Explorer.
Meaning
Meaning
43
Configuration