Fitting The Connection Set - Viessmann Vitosol 300-T Installation Instructions For Contractors
Vacuum tube collector based on the heat pipe principle
Hide thumbs
Also See for Vitosol 300-T:
- Installation instructions manual (36 pages) ,
- Technical manual (144 pages) ,
- Domestic product manual (56 pages)
Table of Contents
Advertisement
Making the hydraulic connections
Fitting the connection set
Components
Installation information
■ All pipes must be cut at a right angle
and deburred.
■ Lubricate all O-ring seals only with the
special grease provided.
(cont.)
■ Initially turn the union nut by hand,
then tighten with an open ended span-
ner by a further ¾ turn.
■ Never fit annealed copper pipes onto
the locking ring fittings.
19
Advertisement
Table of Contents
