Fitting The Connection Set - Viessmann VITOSOL 200-T Installation Instructions Manual
Vacuum tube collector based on the heat pipe principle
Hide thumbs
Also See for VITOSOL 200-T:
- Installation instructions manual (80 pages) ,
- Service instructions manual (24 pages) ,
- Service instructions for contractors (20 pages)
Table of Contents
Advertisement
Hydraulic connections
Fitting the connection set
Components
Installation information
■ All pipes must be cut at a right angle
and deburred.
■ Lubricate all O-ring seals only with the
special grease provided.
52
(cont.)
■ Initially turn the union nut by hand,
then tighten with an open ended span-
ner by a further ¾ turn.
■ Never fit annealed copper pipes onto
the locking ring fittings.
Advertisement
Table of Contents
