Fitting The Connection Set - Viessmann VITOSOL 200-T Installation Instructions Manual
Vacuum tube collector based on the heat pipe principle.
Hide thumbs
Also See for VITOSOL 200-T:
- Installation instructions manual (76 pages) ,
- Service instructions manual (24 pages) ,
- Service instructions for contractors (20 pages)
Table of Contents
Advertisement
Hydraulic connections
Fitting the connection set
Components
Installation information
■ Lubricate O-ring seals only with the
special valve grease provided.
■ Initially tighten the union nut by hand,
then tighten with an open-ended span-
ner by a further ¾ turn.
■ Never use annealed copper pipes with
locking ring fittings.
(cont.)
71
Advertisement
Table of Contents
