Viewing Network and Device Status
Viewing Network and Device Status
The Status page displays the connection status for the WAN, WLAN, and LAN interfaces.
It also displays the firmware and hardware version numbers, illegal attempts to access your
network, as well as all DHCP clients connected to your network.
The following information is displayed on the page:
Field
INERNET
ROAMABOUT R1 Displays system IP settings, the status for DHCP, NAT and
INFORMATION
Security Log
DHCP Client Log Displays information on all DHCP clients on your network.
Using Tools
Use the Tools page to reboot, restore to factory defaults, and upgrade the firmware.
Field
Reset RoamAbout R1
Restore Factory
Defaults
Update Firmware
You can also reset the RoamAbout R1 back to its original factory by pressing the Reset
button on the back panel for 5 seconds.
2-12
Description
Displays connection type and status
.
Firewall services, as well as the wireless interface settings.
Displays the number of attached clients, the firmware versions,
the physical MAC address for each media interface, as well as the
hardware version and serial number.
Displays any illegal attempts to access your network.
Description
Reboots the RoamAbout R1 and retains the current SAVED
configuration settings.
Removes all configuration settings and restores the
RoamAbout R1 back to its original factory state.
Allows you to check the Enterasys Networks Wireless Web
site for upgrades and upgrade the RoamAbout R1 with the
new firmware.