Cleaning The Adf Rollers; Cleaning The Scanner Glass And Background Plates - Visioneer PATRIOT PD45 User Manual

Table of Contents

Advertisement

M
AINTENANCE
Use scissors to open the roller cleaning paper bag, cutting across the dotted line.
n
Caution:
The roller cleaning paper is moistened with isopropyl rubbing alcohol. Please read and
t
follow these precautions to ensure your safety.

Cleaning the ADF Rollers

When you perform cleaning for the feeding rollers in the lower part of the scanner, the rollers need to be rotated
with a light force. Using the Clean Mode, the rollers can be automatically rotated to help cleaning easier and
effective.
1.
Hold the Simplex and Duplex buttons for more than two seconds to access the LCD scanner menu.
2.
Use the up and down arrows to select Clean mode.
3.
Pull on the scanner cover release and lift the lid to open the scanner.
4.
Use the Duplex button to initiate roller rotation. Each time you press on the Duplex button, the rollers will
rotate slightly, allowing you to clean the rollers efficiently.
5.
Use a roller cleaning paper, or wet soft cloth with isopropyl rubbing alcohol (70%), to clean all of the rollers.
Note: Be careful when cleaning the rollers. All of the rollers, except the free rollers, are designed to rotate in one
direction only. Do NOT force the roller to rotate in the opposite direction. Forcing the roller to rotate will damage
it, and cause the scanner to feed pages incorrectly.

Cleaning the Scanner Glass and Background Plates

The background plates are located underneath the scanner glass in both the top and bottom of the scanner. If
you see a warning message that one of the background plates is dirty, simply clean the scanner glass as described
here.
1.
Pull on the scanner cover release and lift the lid to open the scanner.
S
U
G
CANNER
SER
UIDE
V
P
PD45/PH70
®
ISIONEER
ATRIOT
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Patriot ph70

Table of Contents