General Specifications; Cleaning The Calibrator - Fluke 724 Calibration Manual

724/725/726
Calibration Manual

General Specifications

Operating temperature
724 and 725
726
Storage temperature
Stability
Operating altitude
Relative Humidity (% RH operating without
condensation)
Vibration
Safety and EMC
Power requirements
Protection Class
Electromagnetic Compatibility
Size
Weight

Cleaning the Calibrator

To avoid electric shock or damage to the Calibrator, never allow water
inside the Calibrator's case.
If the Calibrator requires cleaning, wipe it down with a cloth that is lightly dampened with
water or a mild detergent.
Do not use aromatic hydrocarbons, chlorinated solvents, or methanol-based fluids when
cleaning the Calibrator. To avoid damaging the case, never apply solvents to the
Calibrator.
12
-10 °C to 55 °C
-10 °C to 50 °C
- 20 °C to 70 °C (limited by battery storage
specifications)
± 0.005 % of range/°C outside of 23 ± 5 °C
3000 meters above mean sea level
90 % (10 to 30 °C)
75 % (30 to 40 °C)
45 % (40 to 50 °C)
35 % (50 to 55 °C)
uncontrolled < 10 °C
Random, 2 g, 5 Hz to 500 Hz
IEC 61010-1, IEC 61010-2-030, Pollution Degree 2
IEC 61326-1 (Portable), CISPR 11 (Class A)
4 AA alkaline batteries
Pollution Degree II
Applies to use in Korea only. Class A Equipment
(Industrial Broadcasting & Communication
[1]
Equipment
[1]
This product meets requirements for industrial
(Class A) electromagnetic wave equipment and the
seller or user should take notice of it. This equipment
is intended for use in business environments and is
not to be used in homes.
96 x 200 x 47 mm (3.75 x 7.9 x 1.86 in)
650 g (1 lb, 7 oz)

Warning